Your HP laser printer flashes with light of error code e8. To fix HP Printer Error Code E8 the mean problem with the scanner cartridge. Once carriage movement arcades, the HP Printer automatically responds by sending an e8 error code light. The cause of the occurrence of E8 Error Code in HP laser Printer could be software based, or there is a break in the scanner motor connection, or the problem could be the motor itself and last the mechanism may have stuck. The mentioned problems had ready been answered with reimage repair tools for the software and manual repairs or maintenance for failure attributed to mechanical parts of the printer. However, the most likely offender is staged mechanically because of the expected wear and tear of the Printer parts. Dust accumulation can also be sensitive mechanical arms and rubber rollers that results in limited movement and stalling eventually. Cleaning and maintenance will most likely resolve the issues behind the e8 error light signal. Or connect to technicians at HP Printer Support Number for assistance.

fix HP Printer Error Code E8

 

Steps to troubleshoot the HP Printer Error Code E8:

Step1: Place the HP Printer over a durable workbench, possibly in a well-lighted and ventilated area. You will be needed a screw driver, a clean rag and alcohol.

Step2: The main printer cover need to be opened and the smaller inner over.

Step3: Unlock the ink cartridge lever, hold the handle and pull it out.

Step4: Look for the printer roller, unclip from the holder.

Step5: The roller need to be hold and clean with the rag damped with alcohol, allow it to dry. The thorough cleaning is needed to remove dust, accumulated ink and other substances that coat the surface.

Step6: Clip the roller back to the printer holder, correct the reinstallation to produce a distinct click as the roller sets into position.

Step7: Turn the printer sideways and look for the jack at the back, remove the two nuts and pull the jack out.

Step8: Clean the black HP Printer roller inside and all the other parts, then reinstall back the jack using the nuts previously taken out.

Step9: Reinstall the ink cartridge back lock the lever down to hold it securely.

Step10: Close the printer and power up. If the error lights still blink, open-up the scanner cover and look for the drive gears.

Step11: Apply oil on the drive gears and close the scanner.

Step12: Power-up the printer again.

Hp customer support

 

Call HP Printer Customer Support Number +44-800-046-5293 (toll-free)

When you have completed the above steps in resolving the error E8 of HP Printer and came across the problem you must get in touch with HP Printer Customer Support Number UK @+44-800-046-5293(toll-free) for instant solving them so that you can continue to next step and get your error fixed steadily, smoothly.  The trained, experienced, qualified technicians guide you in right direction so that you can get rid of error as early.

Leave a Reply

Your email address will not be published. Required fields are marked *