HP Printer Error Code 0xc18a0206 Ink System Failure

Worried about how to fix HP Printer Error Code 0xc18a0206 Ink System Failure Message? Follow some steps below to get your HP Printer working efficiently and sufficiently. First it is important to know what actually causes the error message. The HP Printer Error Code 0xc18a0206 simply indicates Ink System Failure in your Photosmart printer model. The different models that all are affected by this error code include:

  • HP Photosmart C7280
  • HP Photosmart C5180
  • HP Photosmart C6280
  • HP Photosmart C5180
  • HP Photosmart 8250

The Error message may appear if you have been using the outdated or the expired ink cartridge. The message popped up and printer refused to print any longer. You can connect to HP Printer Technical Support for proper understanding of the Error message and get it resolved sooner for non-stop print results.

HP Printer Error Code 0xc18a0206

Steps to Troubleshoot the HP Printer Error Code 0xc18a0206

Method 1:

Step1: Press * and # at the same time

Step2: Press 1, 2, 3 and “support R0632M” should display

Step3: Press > and “information menu” should display

Step4: Press > and “configuration menu” should display

Step5: Press OK and “hardware failure status” should display

Step6: Press OK “failure status: clear”. Press OK to clear

Step7: Press CANCEL

Step8: Turn printer off, unplug power cord for 2 minutes and plug cord back in then turn printer back on.

Method2: Alternative solution to fix your error code 0x18a0206

Step1: Without turning off the product, disconnect the USB cable from the rear of the product.

Step2: Remove the cartridges from the product.

Step3: Wait for the ‘Insert Cartridges’ message to display on the control panel.

Step4: Disconnect the power cord from the back of the product.

Step5: keep 60 seconds patience.

Step6: Reconnecting the power cord. If the product does not automatically turn on, press the Power button ( ).

Step7: Reinsert the cartridges, and then close any open doors on the product.

Step8: If you receive a prompt to print a calibration page, do so.

Step9: Reconnect the USB cable to the rear of the product, and then try printing again.

Connect via calling to HP Printer Customer Support Number +44-800-046-5293 (toll-free)

HP Printer Customer Support Number

If everything is still not ok you can contact to HP Printer Customer Support Number UK @+44-800-046-5293(toll-free) and receive the immediate, instant online remote assistance at your doorstep. The trained, qualified and talented technicians are present 24*7 to give you online remote assistance for your error, queries occurred in the middle of steps being followed.

Leave a Reply

Your email address will not be published. Required fields are marked *